Table Of Contents
Latest update [menu]
v1.42 Updated to use newer code libraries to better target and run reliably on devices in 2024.
Description [menu]
Dual channel function / waveform / signal generator for the speaker / headphone audio output.
Output is 16 bit for each left and right channels and at 44.1kHz. Output will depend on your device hardware. Some device hardware may may filter out the DC bias and low frequency signals. At high frequencies, the waveforms will be distorted due to limited number of samples for each waveform (for example at 4.41kHz, a sine waveform will be approximated by only 10 points). Therefore this is for fun/educational use, for critical applications use a real calibrated function generator.
Left and Right audio channels can be assigned to either channel 1 or channel 2.
Sine, Square & Triangular waveforms.
Frequency range from 1 mHz up to 22 kHz.
Amplitude as percentage 0-100%.
Set duty for square waveforms or skew triangular waveforms to get saw waveforms.
Offset the phase of waveforms.
Sweep frequency or amplitude (Single, Repeat & Bounce modes).
Amplitude Modulation (AM).
Frequency Modulation (FM).
Burst mode for a specific number of waveforms (1-10000).
White noise & pink noise Generator. Pink (1/f) noise falls of at ~3dB per octave between 43 Hz and 44 kHz.
Memory slots to save & recall channel configuration.
Select values with spring slider or number pad.
More detailed explanation available on website
How to install Function Generator APK for Android [menu]
Download Function Generator APK file (com.keuwl.functiongenerator_8_3575262.apk) from APKPure.live, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.keuwl.functiongenerator_8_3575262.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install Function Generator APK on Windows 7/8/10 or MAC PC? [menu]
Download Function Generator APK file(com.keuwl.functiongenerator_8_3575262.apk) from APKPure.live to your PC (ex: /Users/xxx/Downloads/(com.keuwl.functiongenerator_8_3575262.apk)), then follow these steps:
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)
- Simple install APK on PC by drag and drop file com.keuwl.functiongenerator_8_3575262.apk on Emulator screen
Function Generator APK Pros & Cons [menu]
Pros
- This app is safe, it's not require high risk permissions
- Compatible with 32 bit device (most Emulator using 32bit arch CPU)
- Compatible with 64-bit device (some android device and current Bluestacks)
Cons
Everything is good.