Table Of Contents
Latest update [menu]
The Tilt Drive Mode is repaired, and the "gearboxes" have been adjusted.
Description [menu]
Drive with the greatest engine sounds ever heard in a standard car!
Now you can experience some of the coolest engine sounds in the world when they actually follow the engine rpm of your car!
You need a car with an OBDII (OBD-2, On Board Diagnostic) connector, most modern cars have one.
You also need to install an OBDII Bluetooth adapter like the ones used for the Torque app, ELM327 v1.5, (not v2.1) is still the best type for this app, it sends the engine rpm to the Android phone and let the SoundRacer app play the real sports car and bike sounds when you drive. Connect the phone to car audio system for a great sound experience, have fun!
The sounds are recorded from famous sports cars and a classic motorcycle.
These genuine engine sounds are included:
Big American V8 muscle car - real Shelby sound
Exotic Italian V10 sports car - real Lamborghini sound
Legendary Italian V12 sports car - real Ferrari sound
Thrilling Japanese V10 supercar - real Lexus LFA sound
Classic American V-Twin motorcycle - real Harley sound
There are 5 different driving modes. Most exciting is of course the OBD-II mode where the sound follows the engine speed in the car you are driving. You can also use the manual, automatic, paddle or tilt modes.
The OBD-II app experience is as fun and exciting as driving a car with a real SoundRacer product but there are a couple of differences:
One feature in the app is that you can change the ratio between the engine rpm and the sound rpm. If, for example, you are driving a low rpm diesel it can be set so that engine sound goes on 6000 rpm when the car engine is doing 2500 rpm.
The sound and rpm following in the app is depending on the OBD-II adapter and phone performance and may be different than in the SoundRacer FM transmitter.
HOW TO USE:
ENGINE SCREEN
The Engine screen is the starting screen. Here you can select the engine sound with the tabs.
DRIVE SCREEN
The next step is to drive. Touch the Select Drive Mode button to reach the Driving screen. There you can select the driving mode, Manual, Automatic, Paddle, Tilt or OBD-II.
DRIVE WITH OBD-II
Plug in an OBD2 Bluetooth adapter and pair it with your Android phone.
Connect the phone sound output to the car audio system with AUX, Bluetooth or FM transmitter.
Select the OBD-II mode in the Drive screen.
Start the car engine.
Press the Start button in the app and hear the idling sound.
Wait for the three OBD indicators to turn green, sometimes you have to select the ODB-II adapter in a pop up window.
If the third indicator does not turn green, the app may not be able to detect the correct protocol for your car. You can then select the protocol in Menu/Settings. (Some cars have a protocol that is not compatible with the app, then you can cancel the app within two days and request a refund.)
Now you are ready to go!
Always drive safely, wait until you have parked the car in a safe location before you handle the app!
DRIVE MANUALLY
Select a manual mode in the Drive screen.
Start driving by touching the Start/Stop button and hear the start up sounds. Then you can accelerate with a touch control of choice. To hear the real engine sounds, use earphones or connect the phone to good speakers.
STOP ENGINE
By touching the Start/Stop button again you turn off the engine sound.
CHANGE ENGINE
If you touch the Select Engine button, you will navigate back to the Engine screen, and there you may select another engine sound.
MENU
You can select Information, Links, Settings or Share. Under Settings it is possible to change the RPM and car OBD protocol.
SHARE BUTTON
Send link to the app to your friends.
SOUND QUALITY
The volume of the engine sound is changed with the volume buttons of the phone. The sounds in the app are the same as in the SoundRacer products, genuine recordings from famous sports cars. Naturally, the great sound experience of driving a real Super Sports car can never be achieved with an app but this is as close as most of us come.
How to install SoundRacer OBDII Engine Sounds APK for Android [menu]
Download SoundRacer OBDII Engine Sounds APK file from APKPure.live, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install SoundRacer OBDII Engine Sounds APK on Windows 7/8/10 or MAC PC? [menu]
Download SoundRacer OBDII Engine Sounds APK file from APKPure.live to your PC (ex: /Users/xxx/Downloads/), then follow these steps:
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)