Table Of Contents
Latest update [menu]
Changes / Improvements:
- Update Teradek Orbit to Launchpad
Description [menu]
Manage every parameter of your Launchpad PTZ system from the convenience of your smartphone.
Pairing - Pair transmitters and receivers right from your iPhone or iPad.
PTZ Camera Control - Configure your PTZ camera settings, such as pan, tilt, zoom, focus, etc... with your phone. No camera control unit is needed to enable this function in the app.
Spectrum Analyzer - Scan local wireless spectrum and configure the optimal 5GHz channel for your Launchpad PTZ.
Channel Selection - Manually select a 5GHz (40 MHz) channel. Launchpad PTZ can also be set to operate over 20 MHz channels for better wireless performance.
Quality/Range Analyzer - Monitor the quality and range of your wireless link.
3D LUT Selection - Achieve the look you’re after with Launchpad PTZ’s integrated 3D LUT technology. Select from LUT presets or upload your own into the app.
Quality Selection - Choose between several modes of operation: Maximum Quality, Maximum Range and Balanced.
Output Format - Select the output resolution and framerate.
Test Pattern - Output a test pattern.
Audio Settings - Enable a tone to ring when camera recording is triggered, or mute sounds on the device.
Display Settings - Adjust display light output.
System Info - Check the current firmware version and apply updates when available. Also performs factory resets directly from the app.
How to install Teradek Launchpad APK for Android [menu]
Download Teradek Launchpad APK file (com.teradek.bolt.orbit_244_139102701.zip) from APKPure.live, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Download Split APKs Installer (SAI)
- Download and unzip file you already downloaded (com.teradek.bolt.orbit_244_139102701.zip)
- Open Split APKs Installer and follow steps on this app.
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install Teradek Launchpad APK on Windows 7/8/10 or MAC PC? [menu]
Download Teradek Launchpad APK file(com.teradek.bolt.orbit_244_139102701.zip) from APKPure.live to your PC (ex: /Users/xxx/Downloads/(com.teradek.bolt.orbit_244_139102701.zip)), then follow these steps:
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)
- Download and unzip file com.teradek.bolt.orbit_244_139102701.zip.
- Using ADB or Split APKs Installer same as install for Android.
Teradek Launchpad APK Pros & Cons [menu]
Pros
- This app is safe, it's not require high risk permissions
- Compatible with 32 bit device (most Emulator using 32bit arch CPU)
- Compatible with 64-bit device (some android device and current Bluestacks)
Cons
Everything is good.