Latest update
- Improved Gen2 B58 Overrun Brap sound and duration.
- Added G8x Stg1/2 full E85 maps.
- More vehicles / roms supported, plus advanced logging params for more roms.
MHD F+G Series APK Description
The MHD Flasher F+G Series is a complete flash tuning app for your BMW & Toyota Supra A90. Unlike a piggyback module, it is capable of complete DME remapping while retaining all OEM safety mechanisms. This allows for maximum performance, maximum safety, and unrivaled drivability.
---------------------------------------------
Full OBD Flashing:
You can install MHD right at home and start tuning immediately! Simply download the MHD Flasher F+G-Series app that connects via a MHD WiFi adapter and your vehicle’s OBD-II port, start the app and within 5 minutes the initial installation is complete. Further map changes are much faster - only 20 seconds! You can revert your vehicle to the factory OEM flash at any point, and no initial backup is necessary.
---------------------------------------------
Stage 1, Stage 2 und E85 OTS (Off The Shelf) Maps by PureBoost:
N55 EWG (Vehicles built after 07/2013 with electronic wastegate):
- Stage 1 (up to 360HP/540NM) (not available for M2 and X4 M40i)
- Stage 2 (up to 390HP/580NM)
- Stage 2+ (up to 430HP/630NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E20 Maps for ethanol blends of 20%
N55 PWG (pneumatic wastegate):
- Stage 1 (up to 340HP/540NM)
- Stage 2 (up to 370HP/580NM)
- Stage 2+ (up to 400HP/630NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E20 Maps for ethanol blends of 20%
S55 (BMW M3 / M4 F8x):
- Stage 1 (up to 530HP/700NM)
- Stage 2 (up to 560HP/780NM)
- Ethanol Mix Maps: Stage 1, 2 and 2+ E30 Maps for ethanol blends of 30%
B58:
- Stage 1 (up to 440HP/600NM)
- Stage 2 (up to 470HP/650NM)
- Stage 2+HPFP (up to 500HP/700NM)
- Ethanol Mix Maps: Stage 1, 2 Maps for ethanol blends of 30%
S58:
- Stage 1 (up to 630HP/750NM)
- Stage 2 (up to 700HP/850NM)
- Ethanol Mix Maps (up to 750HP / 880NM): Stage 1 & 2 E30+ Maps for - ethanol blends of 30%+
S63:
- Stage 1 (up to 720HP/900NM)
- Stage 2 (up to 780HP/950NM)
- Ethanol Mix Maps (up to 800HP/1000NM): Stage 1 and 2 Maps for ethanol blends of 30%+
N13:
Stage 1 (up to 200HP/280NM, 93oct/98RON)
Stage 2 (up to 235HP/350NM, 93oct/98RON)
---------------------------------------------
Full Data Logging and Live Gauges: Monitor your engine behavior to make sure it is running perfectly using a configurable and very responsive gauge layout. 50+ engine parameters are available at a glance!
---------------------------------------------
These flash options can be applied to any map directly through the app:
- Anti Lag (N55/S55/N13 only at the moment)
- Exhaust Burble (duration & aggressiveness, min/max speed, min/max rpm)
- Remove top speed limiter (Vmax)
- CAN ethanol content reading (N55/S55/N13 only at the moment)
- Cold start noise reduction
- Exhaust flap open in sport mode
- Limit power per gear
- XHP TCU flash support (optimized OTS maps)
- Sport cooling mode for increased water / air intercooler cooling
- and many more
---------------------------------------------
Check out our homepage / user manual for more information, supported cars and recommended modifications for each stage.
How to install MHD F+G Series APK for Android
Download MHD F+G Series APK file (com.mhd.flasher.fseries_145_103500356.zip) from APKPure.live, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Download Split APKs Installer (SAI)
- Download and unzip file you already downloaded (com.mhd.flasher.fseries_145_103500356.zip)
- Open Split APKs Installer and follow steps on this app.
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install MHD F+G Series APK on Windows PC 7/8/10/11 or MAC?
Download MHD F+G Series APK file (com.mhd.flasher.fseries_145_103500356.zip) from APKPure.live to your PC (ex: C://Users/xxx/Downloads/(com.mhd.flasher.fseries_145_103500356.zip), then follow these steps appear on screen.
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)
- Download and unzip file com.mhd.flasher.fseries_145_103500356.zip.
- Using ADB or Split APKs Installer same as install for Android.
MHD F+G Series APK Pros & Cons
Pros
- This app is safe, it's not require high risk permissions
- Compatible with 32 bit device (most Emulator using 32bit arch CPU)
- Compatible with 64-bit device (some android device and current Bluestacks)
Cons
Everything is good.
