Latest update
Minor improvements
MyBrewbot II APK Description
Our aim was to create an Internet enabled temperature controller that didn't rely on wiring relays or complex setup in order to get going. The controller communicates with readily available 433mhz remote control plugs to switch heating and cooling sources on and off.
The controller has a Bluetooth module that links with Tilt hydrometers and can use the temperature and SG data from the Tilt to control the fermentation process.
The controller also connects to iSpindel data sources for control.
Data logging is enabled for Ubidots and BrewFather and the controller app also has data logging capability. Further data links will be established with other brewing applications as they release their APIs.
The controller has a wealth of features all of which are accessible through the free app available on Google Play and iTunes. Key features are:
1. Monitoring in both Centigrade and Fahrenheit.
2. Control for up to two fermentation chambers
3. 15 step profiles for each fermentation chamber including time over temperature, temperature over time, free rise and specific gravity triggers
4. User defined alarms to warn of excessive heating or cooling
5. User defined hysteresis settings
6. A 'slow ramp' setting which uses an ambient temperature sensor to gently raise or lower the temperature
7. Online storage of up to 5 profiles.
8. If you don't have a Tilt or ISpindel then by using two probes in each fermentation chamber (one for beer and one for ambient temperature) the controller will use thermodynamics to estimate the Specific Gravity of your beer based on the heat generated by the yeast as they consume glucose.
How to install MyBrewbot II APK for Android
Download MyBrewbot II APK file (cc.blynk.appexport.mybrewbot_two_5_19698267.apk) from APKPure.live, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (cc.blynk.appexport.mybrewbot_two_5_19698267.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install MyBrewbot II APK on Windows PC 7/8/10/11 or MAC?
Download MyBrewbot II APK file (cc.blynk.appexport.mybrewbot_two_5_19698267.apk) from APKPure.live to your PC (ex: C://Users/xxx/Downloads/(cc.blynk.appexport.mybrewbot_two_5_19698267.apk), then follow these steps appear on screen.
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)
- Simple install APK on PC by drag and drop file cc.blynk.appexport.mybrewbot_two_5_19698267.apk on Emulator screen
MyBrewbot II APK Pros & Cons
Pros
- This app is safe, it's not require high risk permissions
- Compatible with 64-bit device (some android device and current Bluestacks)
Cons
- No best performance On PC (Windows, MAC) (because it's not exists X86 variant)