Latest update
Fixes activation and application of S-parameter devices.
Added a default trigger hysteresis of 0.5 dB to get more stable results in trace mode.
Power Viewer Mobile 2 APK Description
With the new Power Viewer Mobile 2 App you are able to use all Rohde&Schwarz NRP series RF Power Sensor with your Android smartphone or tablet.
Requirements:
o R&S®NRP Power Sensor
o R&S®NRP-Zxx Power Sensor
o Device with Android 5.0 or higher
o USB-OTG adapter cable (If the sensors should be used via USB)
o Network connection with PoE (If Network Sensors should be used)
Optionally a USB hub can be used to connect more than one USB sensor to the Android device.
Supported Features:
o Continuous average mode
o Trace mode
o Up to four sensors simultaneously
o Support for Measurement over Network (with R&S®NRP-xxXN power sensors)
o Flexible user interface
o Extensive settings for the supported measurement modes
Important:
This app depends on a working USB host (USB - On The Go) controller built into your device. Some smartphones block high-power USB devices. In this case only the sensors with low supply power requirements will work, or the use of a self-powered USB hub is necessary.
The Trace Measure mode is only available with Sensors with support of this mode. If a Sensor doesn’t support this mode, nothing will be shown if switching to the Trace mode.
Warning:
Connecting an R&S®NRP power sensor to the USB port of your Android device will drain your battery regardless whether this app is active or not. Make sure to disconnect the power sensor whenever not in use.
How to install Power Viewer Mobile 2 APK for Android
Download Power Viewer Mobile 2 APK file (com.rohdeschwarz.android.nrpdriver_205_2989722.apk) from APKPure.live, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.rohdeschwarz.android.nrpdriver_205_2989722.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install Power Viewer Mobile 2 APK on Windows PC 7/8/10/11 or MAC?
Download Power Viewer Mobile 2 APK file (com.rohdeschwarz.android.nrpdriver_205_2989722.apk) from APKPure.live to your PC (ex: C://Users/xxx/Downloads/(com.rohdeschwarz.android.nrpdriver_205_2989722.apk), then follow these steps appear on screen.
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)
- Simple install APK on PC by drag and drop file com.rohdeschwarz.android.nrpdriver_205_2989722.apk on Emulator screen
Power Viewer Mobile 2 APK Pros & Cons
Pros
- This app is safe, it's not require high risk permissions
- Compatible with 32 bit device (most Emulator using 32bit arch CPU)
- Compatible with 64-bit device (some android device and current Bluestacks)
Cons
Everything is good.
